Which corner would you like your electric towel warmer’s electrical connection in?

9.11.2026

Choosing the electrical connection corner for an electric towel warmer

A well-designed towel warmer suits both your space and your everyday needs. The position of the electrical connection matters too: thoughtful placement ensures a neat installation and makes the towel warmer easy to use. REJ Design’s electric towel warmers can be hardwired with no visible cables or connected to a socket using a power cord with a plug. On the ladder-style Tango and Largo models, the electrical connection can be positioned in any of the four corners. On the Vivo model, either upper corner can be used.

Two ways to install an electric towel warmer

With a hardwired installation, the electrical connection is completely concealed behind the towel warmer’s mounting leg. This allows the design to stand out, with no visible cables on the wall.

Alternatively, the towel warmer can be connected to a socket using a power cord with a plug. In this case, choose the connection corner according to the socket’s position so that the cord runs as discreetly as possible from the towel warmer to the socket.

Flexibility in choosing the connection corner

On REJ Design’s electric towel warmers, the default electrical connection position is in the upper right mounting leg. The upper left mounting leg is also ready for connection, so you can choose the most suitable leg even at the installation site.

The ladder-style Tango and Largo models offer additional flexibility, as they can be rotated 180 degrees and installed upside down. This moves the connection-ready mounting legs to the bottom, allowing either a hardwired connection or a power cord to be positioned in the lower right or lower left corner. Tango and Largo therefore allow you to choose any of the four corners to best suit your space and everyday needs.

Keep the timer switch within easy reach

When choosing the installation orientation, consider the position of the timer switch as well. The timer switch is located at the top of the right-hand vertical tube, on the same side as the default electrical connection. If a Tango or Largo towel warmer is installed upside down, the timer switch moves to the bottom of the left-hand vertical tube.

When planning the placement of your Tango or Largo towel warmer, make sure the timer switch will be conveniently positioned for everyday use. On Vivo towel warmers, the timer switch is always located at the top of the right-hand vertical tube.

Thoughtful details complete the design

Considering the electrical connection position, the route of any power cord and access to the timer switch early in the planning process ensures a result that is both stylish and practical. Flexible connection options help you position the towel warmer where you need it in everyday life.

To recap: on the ladder-style Tango and Largo models, the electrical connection can be positioned in any of the four corners. On the Vivo model, either upper corner can be used.

Link to the Youtube video: https://youtube.com/shorts/4pavUjaLdAw?si=6kxmtpi55WHZJlbC